Lifting Column

Instruction manual: all tables are preset from factory to run from lowest level to
the highest level, but all tables must be initialized after assembly and before
using (zero setting) item 1-4. The master remote control unit can be used for
2 memory settings, and zero setting item 1-5-13. User's remote control unit can
only be used for zero setting item 1-5.

Zero setting item 1-5 procedures:
1) Take the plug of remote control and connect it to zero setting connection
    plugs
2) Push the button for upward, and move the table about 100mm
3) Push the button for downward and move the table to the bottom, and now
    the table is initialized (zero)
4) Take the plug out of zero setting connection plugs and connect it to the
    remote control connection plug
5) Now, it is possible to move table from lowest level to the highest level
    with the master remote control and user remote control unit

Memory setting continuous item 6-13 procedures:
1) Push setting button about 20s, and a beep sound will appear
2) Push the button upward, and move the table to desired highest level
3) Push the memory button 1 for desired highest level about 1s. A short beep
    will appear
4) Push the button for downward, and go to the desired lowest level
5) Push the memory button 3 for desired lowest level about 1s, and a short
    beep will appear
6) Push the setting button about 20s, and a beep sound will appear
7) Push the setting button about 7s, and the setting is confirmed
8) Now, it is possible to move the table from lowest level to the highest level
    with master remote control and user's remote control unit
9) Notice: the table will be a little bit unstable when moving from the highest
    level to lowest level, but this only occurs when making memory setting